Release Notes

Version 2.37.486.5466

Fixed error time reset

Version 2.36.497.5446

Fixed problem with missing metadata

Version 2.35.880.5439

OPCUA documentation update
Camera failure is not blocking metadata writting process anymore

Version 2.34.620.5432

Time of occurance added to the error table
Added file “version_info.txt” that contains actual software version
Added “CamerasAmount” parameter to “IGeneralCameraSettings.json” that specifies amount of expected cameras
Made actual OPCUA methods description

Version 2.33.423.5376

Add metadata support to the TCP connection.
error subsystem
disk full error
Error “Halkon license not available”
Error “Camera not connected”
error “Camera configuration file corrupted”
periodic ping of the cameras to check availability
shut down computer OPCUA function
get current software version OPCUA function
expected amount of cameras in general config file
error message if there is not 6(general config) cameras

Version 2.32.413.5309

JSON config now overwrites any camera configuration

Version 2.31.547.5253

automatic camera restat
manual camera parameter saving trough OPC UA

Version 2.29.524.5243

fix error with setting trough OPC UA
added ability to manually restart camera

Version 2.28.499.5184

added more tracing for errors

Version 2.27.676.5151

fix error with camera settings

Version 2.26.490.5093

bad images metadata
more camera parameters to read/set with OPCUA

Version 2.25.578.5081

fix for multiple markers loading in parallel

Version 2.24.569.5073

fix for multicameras crash

Version 2.23.452.5068

fix for multicameras crash

Version 2.22.366.5023

Ability to disable encoder
Recornition is applied to the latest image taken
Increased vertical gap for marker postion from 7px to 15px(now it equals 0.6mm, 0.05ppx)
Changed version display
Console minimized on start to avoid accidental clicking
After learning marker detection is applied to the latest image taken
Change light in UI is now in steps of 1, not 5
Ringbuffer is not in the data folder
Installer now allows to specify installation directory

Version 2.21.486.5015

Gain control added

Version 2.20.440.5008

Added restart trough OPCUA

Version 2.19.436.5005

Changed angle detection

Version 2.18.468.4988

Saving camera settings on view window close

Version 2.17.468.4982

Fixed error with camera view
Created installer

Version 2.16.675.4911

Ringbuffer speed improvements

Version 2.15.420.4787

Fiuxed problem with light settings
Added config file recovery if it was erased
Fixed problem with exposure time

Version 2.14.552.4735

Updated x64 folder

Version 2.13.930.4709

Changed ringbuffer operations to be executed after analysis
Added slight delay for image requests to give OS some time to write images

Version 2.12.398.4638

Set autotrigger cycle time to 1.6 sec
Set ringbuffer deletion delay to 200ms

Version 2.11.396.4631

Fixed ringbuffer
Added DebugLight parameter for EVT

Version 2.10.686.4630

increased amount of files per one deletion
added EVT parameters to control from JSON file

Version 2.9.675.4550

Added timing data to meta file and to TCP output

Version 2.8.458.4541

Added mirroring posibility
Added carrier id to tcp protocol
added carier id to meta file

Version 2.7.535.4493

Fix for aquisition time

Version 2.6.467.4472

Hawkeye cameras will ignore leds commands from PLC

Version 2.5.860.4458

Fixed error with _origin folder
Disabled noise romaval for pattern matching

Version 2.4.861.4455

Fixed bug with light

Version 2.4.749.4455

Moved the blue line to better fit 360 deg mark

Version 2.4.527.4452

Limited LED's to be minimum 20%. If lower - switch off completly

Version 2.3.463.4448

Added integration settings into camera
Lowered possible recognition threshold
Moved configuration outside program folder