DokuWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Release Notes ======
===== Version 2.37.486.5466 =====
  * Fixed error time reset

===== Version 2.36.497.5446 =====
  * Fixed problem with missing metadata

===== Version 2.35.880.5439 =====
  * OPCUA documentation update
  * Camera failure is not blocking metadata writting process anymore
===== Version 2.34.620.5432 =====
  * Time of occurance added to the error table
  * Added file "version_info.txt" that contains actual software version
  * Added "CamerasAmount" parameter to "IGeneralCameraSettings.json" that specifies amount of expected cameras
  * Made actual [[soplarpet:OPCUA_methods| OPCUA methods description]]
===== Version 2.33.423.5376 =====
  * Add metadata support to the TCP connection.
  * error subsystem
  * disk full error
  * Error "Halkon license not available"
  * Error "Camera not connected"
  * error "Camera configuration file corrupted"
  * periodic ping of the cameras to check availability
  * shut down computer OPCUA function
  * get current software version OPCUA function
  * expected amount of cameras in general config file
  * error message if there is not 6(general config) cameras
===== Version 2.32.413.5309 =====
  * JSON config now overwrites any camera configuration
===== Version 2.31.547.5253 =====
  * automatic camera restat
  * manual camera parameter saving trough OPC UA
===== Version 2.29.524.5243 =====
  * fix error with setting trough OPC UA
  * added ability to manually restart camera
===== Version 2.28.499.5184 =====
  * added more tracing for errors
===== Version 2.27.676.5151 =====
  * fix error with camera settings
===== Version 2.26.490.5093 =====
  * bad images metadata
  * more camera parameters to read/set with OPCUA
===== Version 2.25.578.5081 =====
  * fix for multiple markers loading in parallel
===== Version 2.24.569.5073 =====
  * fix for multicameras crash
===== Version 2.23.452.5068 =====
  * fix for multicameras crash
===== Version 2.22.366.5023 =====
  * Ability to disable encoder
  * Recornition is applied to the latest image taken
  * Increased vertical gap for marker postion from 7px to 15px(now it equals 0.6mm, 0.05ppx)
  * Changed version display
  * Console minimized on start to avoid accidental clicking
  * After learning marker detection is applied to the latest image taken
  * Change light in UI is now in steps of 1, not 5
  * Ringbuffer is not in the data folder
  * Installer now allows to specify installation directory
===== Version 2.21.486.5015 =====
  * Gain control added
===== Version 2.20.440.5008 =====
  * Added restart trough OPCUA
===== Version 2.19.436.5005 =====
  * Changed angle detection
===== Version 2.18.468.4988 =====
  * Saving camera settings on view window close
===== Version 2.17.468.4982 =====
  * Fixed error with camera view
  * Created installer
===== Version 2.16.675.4911 =====
  * Ringbuffer speed improvements
===== Version 2.15.420.4787 =====
  * Fiuxed problem with light settings
  * Added config file recovery if it was erased
  * Fixed problem with exposure time
===== Version 2.14.552.4735 =====
  * Updated x64 folder
===== Version 2.13.930.4709 =====
  * Changed ringbuffer operations to be executed after analysis
  * Added slight delay for image requests to give OS some time to write images
===== Version 2.12.398.4638 =====
  * Set autotrigger cycle time to 1.6 sec
  * Set ringbuffer deletion delay to 200ms
===== Version 2.11.396.4631 =====
  * Fixed ringbuffer
  * Added DebugLight parameter for EVT
===== Version 2.10.686.4630 =====
  * increased amount of files per one deletion
  * added EVT parameters to control from JSON file

===== Version 2.9.675.4550 =====
  * Added timing data to meta file and to TCP output
===== Version 2.8.458.4541 =====
  * Added mirroring posibility
  * Added carrier id to tcp protocol
  * added carier id to meta file
===== Version 2.7.535.4493 =====
  * Fix for aquisition time
===== Version 2.6.467.4472 =====
  * Hawkeye cameras will ignore leds commands from PLC
===== Version 2.5.860.4458 =====
  * Fixed error with _origin folder
  * Disabled noise romaval for pattern matching
===== Version 2.4.861.4455 =====
  * Fixed bug with light
===== Version 2.4.749.4455 =====
  * Moved the blue line to better fit 360 deg mark
===== Version 2.4.527.4452 =====
  * Limited LED's to be minimum 20%. If lower - switch off completly
===== Version 2.3.463.4448 =====
  * Added integration settings into camera
  * Lowered possible recognition threshold
  * Moved configuration outside program folder