linbus:multicontroller [Inspectron docs]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== API ======
===== Device settings =====

Get settings:
<code>
GET https://localhost:5000/settings
</code>
response:
<code>
[
   {
      "name":"test",
      "minHeight":10,
      "maxHeight":100,
      "protocol":1
   },
   {
      "name":"test2",
      "minHeight":10,
      "maxHeight":100,
      "protocol":1
   }
]
</code>

Set settings:
<code>
POST https://localhost:5000/settings
[
   {
      "name":"test",
      "minHeight":10,
      "maxHeight":100,
      "protocol":1
   },
   {
      "name":"test2",
      "minHeight":10,
      "maxHeight":100,
      "protocol":1
   }
]
</code>
No responce

Note:protocol should be eather 0 or 1. This is depending on which controller we are using(old or new).

===== Device position =====

Get all devices:
<code>
GET https://localhost:5000/device
</code>
response:

<code>
[
   {
      "name":"test",
      "value":10,
      "min":10,
      "max":100,
      "storedPositions":[
         
      ]
   },
   {
      "name":"test2",
      "value":10,
      "min":10,
      "max":100,
      "storedPositions":[
         
      ]
   }
]
</code>

Set device height:
<code>
POST https://localhost:5000/device
{
      "name":"test",
      "value":10,
      "storedPositions":[
         
      ]
}
</code>

No responce