curved_wafer [Inspectron docs]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Release notes ======
===== Version 1.2.17.4366 =====
  * Ridge detection works with defect on ridge
===== Version 1.2.16.4304 =====
  * fixed halcon export glitch
===== Version 1.2.15.4304 =====
  * unpump windows moved
===== Version 1.2.14.4276 =====
  * Decreased size of top unpump search
===== Version 1.2.13.4071 =====
  * Changed top unpump search
===== Version 1.2.12.3937 =====
  * Decreasing top unpump area to 40
  * Decreasing bottom unpump area to 40
===== Version 1.2.11.3899 =====
  * Problem with scaling fixed
===== Version 1.2.10.3898 =====
  * Preparation bottom ridge end search area. made narrower
  * top unpump area. decreased required line width
===== Version 1.2.9.3800 =====
  * Decreased threshould of cross-detection to 40%
===== Version 1.2.8.3589 =====
  * New preparation based on 2 top-ridge parts
  * scale parameters added
===== Version 1.2.7.3574 =====
  * Apply ignorance right after defect detection but before creteria filter
//The problem was related to ignorance area was applied after creteria search.
In simple steps, here is how algorithm was working://

  - //Find defects//
  - //Filter defects by size//
  - //Remove defects under ignorance areas//
//
This was leading to next situation: Filter was detecting big defect. Ignorance area was cutting a big part of it. Small part, which is left was still considered as a defect.

Now I moved ignorance area before creteria. So if there is small part left, creteria will cut it out.//

===== Version 1.2.6.3450 =====
  * Top unpump detection now tryes to also find the line instead of just calculating distance
===== Version 1.2.5.3442 =====
  * display ignorance areas
===== Version 1.2.4.3428 =====
  * changed greedenes of the cross-search algorithm
===== Version 1.2.3.3408 =====
  * thread error as full-screen B-defect

===== Version 1.2.2.3400 =====
  * Removed C-area
  * Extended B-area to cover old C-area
===== Version 1.2.1.3374 =====
  * Disable D-area
===== Version 1.2.0.3372 =====
  * Alignment changed from left to center

===== Version 1.1.4.3316 =====
  * Increase the size of top unpump ignore area

===== Version 1.1.3.3316 =====
  * Top unpump ignore area is tied to bottom unpump area on fixed distance of 13090 px (+-20px window)

===== Version 1.1.2.3309 =====
  * Decreased cross detection score from 80% to 70%

===== Version 1.1.1.3252 =====
  * increased area size of top extended area to 200
  * increased area size of bottom extended area to 300

===== Version 1.1.0.3251 =====
  * added versioning
  * broaght back VarThreshold instead of vertival convolution